Thomas Hinton, Riley Patten, Antonio J. PereiraTavares, Cody Crosby and Daniel J. Shiwarski Image: Upstream paper illustration of the Allstruder and its components, assembly and printer installation (Figure 1). Source: https://doi.org/10.1016/j.ohx.2026.e00827 Source file: https://cdn.ncbi.nlm.nih.gov/pmc/blobs/5993/13594859/183368be4a42/gr1.webp Reuse basis: CC-BY-4.0 Upstream rights statement: https://pmc.ncbi.nlm.nih.gov/articles/PMC13594859/ License terms: https://creativecommons.org/licenses/by/4.0/ Source image SHA-256: caa7a2e729dbfabe86850efec7b6605d9114839ae13bffced50f4f5a77cf1ea3 Published image SHA-256: caa7a2e729dbfabe86850efec7b6605d9114839ae13bffced50f4f5a77cf1ea3 Changes: Original image unchanged; displayed responsively. Media review date: 2026-10-26 No endorsement or hardware testing is claimed. UPSTREAM RIGHTS STATEMENT thetjhinton@gmail.com djs87@pitt.edu Received 2026 Jan 26; Revised 2026 Aug 13; Accepted 2026 Aug 14; Collection date 2026 Dec. © 2026 The Author(s) This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/). PMC Copyright notice PMCID: PMC13594859 PMID: 42774578 Graphical abstract Open in a new tab The Allstruder syringe pump extruder. Overview of the Allstruder, an open-source syringe pump extruder built for simple, rigid construction and broad compatibility across desktop 3D printers and syringe formats. The device is assembled from easily sourced, robust components, including a linear rail, NEMA 14 and 17 motors, and an 8 mm diameter leadscrew. Its rigid actuator limits axial deflection and improves extrusion performance. T Original publication: HardwareX 28 (2026), e00827.