DH200 Autonomous Surface Vehicle (ASV)
Robot / hardware buildBSD-3-Clause CNC-routed PVC-sheet autonomous surface vessel (~2 m waterline length, ~32.8 kg hull + electronics box) with Rhino/Fusion CAD, CNC cut plans, hydrostatics/hydrodynamics data, and Python navigation software (LOC MIND). [1] [2] [3]
Build & first use →Official websiteSource codeUpstream build guideBill of materials
- For
- Marine robotics researchers, oceanography groups, and builders needing a CNC-manufacturable open-source USV/ASV. [1]
- Cost
- No current cost yet. Upstream bill of materials [1]
- Source rights
- Named licenses are documented by part. Review licenses
- Unknowns
- host computer, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details
Licenses & related hardware
- Ecosystem
- Raspberry Pi
- License
- BSD-3-Clause · Details by part
Overview
The DH200 (Dragon Head 200) is an open-source autonomous surface vessel developed at the Laboratory of Waves and Current (LOC/COPPE/UFRJ) and published in the *Journal of Marine Science and Engineering* (December 2025). Released under BSD-3-Clause, it targets researchers who need a reproducible ~2-meter surface hull with published hydrostatic and hydrodynamic characterization rather than a closed commercial USV. [1] [4]
Is this for you?
- Use cases
- Autonomous surface surveying and marine robotics research
- Hydrodynamic and control testing in tanks or open water
Inferred from LOC/COPPE/UFRJ publication and hydrostatics/hydrodynamics datasets.
[1] · Editorial assessment
- Known limitations
- Hull manufacturing requires CNC routing of 5 mm and 8 mm PVC sheets (6x 5 mm sheets and 2x 8 mm sheets in Aspire/DXF cut plans).
- Electronics are documented via an electrical diagram PDF (docs/asv_dh200_e_diagram.pdf) rather than editable KiCad/EDA PCB schematics.
- Total USD/BRL build cost is stored in docs/BoM_DH200.xlsx and was not independently repriced or verified in this review.
- Source review only: CNC fabrication, waterproofing, sea trials, and LOC MIND runtime were not physically tested.
Scoped to inspected repository tree and documentation.
What you need
Hardware & parts
Assembly & first use
Open the upstream getting-started guide [1] · Project documentation [1]
- Assembly
CNC-routed 5 mm and 8 mm PVC sheet hull (DXF, PDF, and Vectric Aspire .crv3d toolpaths in cnc_files/) with waterproof electronics box; detailed in docs/DH200_Assembly_Report.pdf and docs/asv_dh200_e_diagram.pdf.
Cost
No current, complete configuration-specific build cost has been established for this profile.
Cost and review boundaries
An itemized spreadsheet (docs/BoM_DH200.xlsx) is committed in docs/, but a current delivered build cost has not been extracted or verified against regional suppliers, and no custom PCB EDA files are included for the bought-in marine electronics. This review inspected only the pinned revision (e2f440c07395); no CNC routing, hull waterproofing, bench electrical bring-up, or water trial was performed. [1] [4]
3D preview
Preview not available yet. The upstream design is linked below. An interactive preview has not been prepared for this profile.
Model sources
The upstream design is linked below. An interactive preview has not been prepared for this profile.
Project notes
Hull manufacturing, characterization, and software
Instead of fiberglass layup molds, the hull is designed to be CNC-routed from 5 mm and 8 mm PVC sheets. The cnc_files/ directory provides DXF cut plans, PDF cutting reports, and Vectric Aspire .crv3d toolpaths across six 5 mm sheets and two 8 mm sheets, accompanied by 3D CAD assets in rhino_files/ and fusion_files/. According to fusion_files/info_fusion.txt, the combined hull and electronics box weighs 32.82 kg, with the electronics enclosure alone measuring 375 × 310 × 140 mm (3.50 kg); the hydrostatics table places the ~30.0 kg displacement point around 0.08 m draft with a 1.90 m waterline length and 0.51 m waterline beam. [1] [2] [3]
The repository also publishes stability curves (hydrostatics/), added-mass, damping, and RAO tables (hydrodynamics/), an assembly report (docs/DH200_Assembly_Report.pdf), an electrical wiring diagram (docs/asv_dh200_e_diagram.pdf), and loc_mind/, a Python navigation stack for an onboard Raspberry Pi paired with a land-station GUI. [1]
What we checked
Source review only. No CNC cutting, hull assembly, waterproofing test, or open-water trial was performed. No local image asset is bundled yet.
Not yet established
- Requirements: operating system, host computer
- A step-by-step setup summary
Updates
Source files and licenses
Permissively BSD-3-Clause licensed autonomous surface vessel with complete CNC hull cut plans, Rhino/Fusion CAD, hydrodynamic data, and Python navigation software; partial because onboard electronics rely on bought-in components documented via PDF wiring diagram rather than open PCB EDA sources.
| Layer | Availability / license |
|---|---|
| mechanical design | available · BSD-3-Clause DXF cut plans, Vectric Aspire .crv3d toolpaths, Rhino CAD (rhino_files/), and Fusion 360 references (fusion_files/) under BSD-3-Clause. [1] [4] |
| electronics | not found · License not fully assessed Electrical wiring diagram is provided as docs/asv_dh200_e_diagram.pdf, but no custom editable PCB schematics/layouts are present; uses off-the-shelf marine electronics and Raspberry Pi. [1] |
| firmware | not found · License not fully assessed No custom embedded microcontroller firmware in repository; onboard autonomy runs in Python on Raspberry Pi. [1] |
| software | available · BSD-3-Clause LOC MIND onboard Raspberry Pi Python navigation stack and land-station GUI. [1] [4] |
| documentation | available · BSD-3-Clause Assembly report PDF, electrical diagram PDF, BOM spreadsheet, and JMSE 2025 open-access paper (DOI 10.3390/jmse13122380). [1] [4] |
Classical marine navigation/control vessel; no ML model weights.
Includes vessel hydrostatics/hydrodynamics engineering tables rather than an ML dataset.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
- S001 mrsonandrade/dh200_asv README.md
Repository layout, LOC MIND Python software description, CNC/CAD folders, and JMSE 2025 paper citation.Revision, date & where cited
LOC/COPPE/UFRJ · github.com · revision
e2f440c· README.md at · Accessed Nov 21, 2026
Used for: Overview, Is this for you?, What you need, Hardware & parts and 5 more - S002 mrsonandrade/dh200_asv fusion_files/info_fusion.txt
Hull + electronics box mass (32,820 g), electronics box dimensions (375 x 310 x 140 mm), center of mass, and inertia tensor.Revision, date & where cited
LOC/COPPE/UFRJ · github.com · revision
e2f440c· fusion_files/info_fusion.txt at · Accessed Nov 21, 2026
Used for: Is this for you?, Hardware & parts, Hull manufacturing, characterization, and software - S003 mrsonandrade/dh200_asv hydrostatics/hydrostatics.csv
Hydrostatic displacement, waterline length (~1.90 m at 0.08 m draft), and beam (~0.51 m) curves.Revision, date & where cited
LOC/COPPE/UFRJ · github.com · revision
e2f440c· hydrostatics/hydrostatics.csv at · Accessed Nov 21, 2026
Used for: Hardware & parts, Hull manufacturing, characterization, and software - S004 mrsonandrade/dh200_asv LICENSE.md
Root BSD-3-Clause license.Revision, date & where cited
LOC/COPPE/UFRJ · github.com · revision
e2f440c· LICENSE.md at · Accessed Nov 21, 2026
Used for: Overview, Cost, Source files and licenses
Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5
Change history
2026-11-21 — Initial source-reviewed draft for Hardware Blind-Spot Batch 1.