KlaskTron
Robot / hardware buildDesktop robotic KLASK game table with motorized magnetic pegs, overhead vision and ROS 2 control. [1]
Build & first use →Official websiteSource codeUpstream build guideBill of materials
- For
- Robot builders researching tabletop game robot with actuated magnetic pegs. [1]
- Cost
- No current cost yet. Upstream bill of materials [1] [2]
- Source rights
- Named licenses are documented by part. Review licenses
- Unknowns
- host computer, tools, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details

View ETH Zürich’s photo of the assembled KlaskTron. [3]
Licenses & related hardware
- License
- CERN-OHL-S-2.0, AGPL-3.0, CC BY 4.0 · Details by part
Overview
KlaskTron automates the magnetic tabletop game KLASK for physical reinforcement-learning experiments. The hardware repository covers SolidWorks assemblies and parts, CoreXY motor command conversion and camera processing. The ODrive controller exposes calibration, homing and motor-state services. Its state-estimation node combines estimates of the ball and peg positions into a game state. The agent inference node lives in the separate klask_software repository. [1] [2]
Plan the mechanical assembly, electronics and vision setup together. The assembly guide covers wiring and installation. The runtime guide covers bringing up the ROS 2 system. Check the hardware and state-estimation interfaces alongside the inference repository before choosing which components to build or adapt. The hardware designs use CERN-OHL-S-2.0, the hardware repository’s ROS 2 code uses AGPL-3.0, and its documentation uses CC BY 4.0. Current sourcing, delivered build cost, mechanical tolerances and physical game operation remain unverified. [1] [2]
Is this for you?
- Known limitations
- Current sourcing, mechanical tolerances, controller setup and physical game operation remain unverified.
Scoped to the inspected sources and verification performed.
[1] · Editorial assessment
Hardware & parts
Upstream bill of materials [1] [2]
- Hardware configuration
Tabletop game robot with actuated magnetic pegs
Assembly & first use
Cost
No current, complete configuration-specific build cost has been established for this profile.
3D preview
Preview not available yet. The upstream design is linked below. An interactive preview has not been prepared for this profile.
Model sources
The upstream design is linked below. An interactive preview has not been prepared for this profile.
What we checked
Source review only. No physical build or runtime test. Image credited to upstream.
Not yet established
- Requirements: operating system, host computer, tools
- A step-by-step setup summary
Updates
- Upstream last updated
- Not established
- Latest release
- Not established
- Profile updated
- Nov 15, 2026
- Sources last checked
- Nov 15, 2026
- Next review
- Dec 15, 2026
- Reviewed revision
c24077c
Source files and licenses
Includes a documented physical robot design with scope and reuse terms described by artifact.
| Layer | Availability / license |
|---|---|
| mechanical design | available · CERN-OHL-S-2.0 No separately licensed implementation located for this layer in the reviewed sources. [1] |
| electronics | not found · License not fully assessed No separately licensed implementation located for this layer in the reviewed sources. [1] |
| firmware | not found · License not fully assessed No separately licensed implementation located for this layer in the reviewed sources. [1] |
| software | available · AGPL-3.0 No separately licensed implementation located for this layer in the reviewed sources. [1] |
| documentation | available · CC BY 4.0 No separately licensed implementation located for this layer in the reviewed sources. [1] |
This entry scopes the physical robot and its build documentation.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
- S001 IDSCETHZurich/klask_hardware README.md
Revision, date & where cited
ETH Zurich Institute for Dynamic Systems and Control · github.com · revision
c24077c· README.md at · Accessed Nov 15, 2026
Used for: Overview, Is this for you?, Hardware & parts, Assembly & first use and 1 more - S002 IDSCETHZurich/klask_hardware docs/index.md
Upstream docs/index.md for this project.Revision, date & where cited
ETH Zurich Institute for Dynamic Systems and Control · github.com · revision
c24077c· docs/index.md at · Accessed Nov 15, 2026
Used for: Overview, Hardware & parts - S003 ETH Zürich KlaskTron assembly photograph
The platform page captions the image “The full assembly, with the overhead camera rig mounted above the board.” The image shows the assembled KlaskTron rig and playing board.Revision, date & where cited
ETH Zürich Institute for Dynamic Systems and Control · klasktron.com · https://klasktron.com/platform · Accessed Nov 15, 2026
Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5
Change history
2026-11-15 — Initial source-reviewed hardware profile and attributed upstream image.
2026-11-15 — Added a link to the upstream photograph of the physical robot.