Open Source RoboticsRobots, software & learning

MeArm

Robot / hardware build

A four-degree-of-freedom educational arm made from versioned laser-cut parts. [1]

Build & first use →Official website

For
STEAM educators; Makers with laser-cutting access or a cutting service [1]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
host computer, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Photograph of MeArm V3.0 from the creator’s June 2023 assembly guide, with separate control electronics and a battery pack on the bench.
Photograph of MeArm V3.0 from the creator’s June 2023 assembly guide, with separate control electronics and a battery pack on the bench. phenoptix / MeArm · CC-BY-SA-4.0. Original image unchanged; displayed responsively. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
License
CC-BY-SA-3.0 · license not fully assessed for documentation · Details by part

Requirements · Research details and dates

On this page

Overview

MeArm's reviewed release is v3.0, but the repository retains several generations of this four-degree-of-freedom arm. Its DXF files use 3 mm material, and assembly PDFs are organized by version. Keep the cutting files and instructions together. [1] [2]

Version 3 removes the elastic bands but still requires a PCB. Version 2 incorporates a PCB in its base and uses elastic bands or nitrile O-rings; version 1 does not require a PCB. Choosing v3 therefore does not eliminate electronics sourcing, and parts from those versions should not be assumed interchangeable. [1]

The README estimates around 40 minutes for v3, 30 minutes for v2 and two hours for v1. Those are upstream estimates, not times measured here, and they do not establish cutting, sourcing or controller setup time. [1]

The repository README describes hardware as CC BY-SA 3.0 and assigns separate noncommercial terms to repository images. The photograph shown here comes from the creator’s separate V3.0 assembly guide, which displays a CC BY-SA 4.0 license. Its attribution and reuse terms are linked with the image. These are distinct grants; the design-file license does not supply permission for every product photograph. [1] [6]

The exact servo/PCB configuration, control software and complete delivered cost still need verification before a supported build can be specified. [1]

Is this for you?

Known limitations
  • Version 3 still requires a PCB
  • Version 2 uses elastic bands or nitrile O-rings
  • Published assembly times are upstream estimates

[1]

What you need

Tools
  • 3 mm material cutting route for the DXF designs

[1]

Hardware & parts

Hardware configuration

Laser-cut articulated arm

[1]

Degrees of freedom

4

[1]

Assembly & first use

Project documentation [1]

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. The checked file inventories did not establish a supported 3D payload. The design may be supplied as drawings, an external CAD document or a separate download.

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: operating system, host computer
  • A step-by-step setup summary

Updates

Upstream last updated
Mar 3, 2023 [2]
Latest release
Mar 3, 2023 [2]
Profile updated
Oct 26, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
2ce24ec8dcaaf967327c06e2ebfe368678958f56 (release v3.0) · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · CC-BY-SA-3.0
README assigns hardware BY-SA 3.0 and separately restricts image reuse; do not apply the hardware terms to photographs. [1] [4]
electronicsnot found · License not fully assessed
No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4]
firmwarenot found · License not fully assessed
No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4]
softwarenot found · License not fully assessed
No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4]
documentationavailable · License not fully assessed
Assembly documents available; image terms are separately restricted in the README. [1] [4]

This profile covers the described physical configuration and control route without a particular learned policy or dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

  • S001 mearm/MeArm: README.md
    Revision, date & where cited

    github.com · revision 2ce24ec · Accessed Sep 30, 2026


    Used for: Overview, Is this for you?, What you need, Hardware & parts and 2 more
  • S002 mearm/MeArm: commit 2ce24ec
    Revision, date & where cited

    github.com · Accessed Sep 30, 2026


    Used for: Overview, What we checked
  • S004 mearm/MeArm: files
    Revision, date & where cited

    github.com · revision 2ce24ec · archive file inventory · Accessed Sep 30, 2026


    Used for: Source files and licenses
  • S006 Upstream image and reuse attribution
    Media-only review: Photograph of MeArm V3.0 from the creator’s June 2023 assembly guide, with separate control electronics and a battery pack on the bench. Reuse basis: CC-BY-SA-4.0. Actual browser-read visible source identifiesauthorphenoptix, June13,2023date andCCBYSAlicensebadgewhoseactualanchorisCCBYSA4.0,notNC. The guide expresslysayscheckyourversion,thisisv3.0andcoverstheofficialbuild;itlistsfourhobbyservosandbaseboardPCB. This agreeswithselectedMeArmv3.0generation,notolderV1.1orV0.3. SelectedfirstherophotographshowscompletedacrylicarmwithbasePCB,servo/wristandgripper,withArduino/othercontrolelectronicsandbatterypackseparateonthebench. Noexactservomodel,controllerfirmware,performance,kitcontentsorcurrentprice isclaimedbythephoto. Adjacentsecondheroimageisausercustomcreation/videostillandisexcluded;otherolderMeArmprojects and thirdpartymakepostsareexcluded. Thisistheseparatecreatorpublication'sCCBYSA4.0grantforitsownarticle/photos;repositoryimageNCtermsandotherpublicationsarepreservedbutnotusedaspermissionforthisdistinctsource. Noexternalcreditorexclusionappearsforthisfirstownbuildphoto. OriginalJPEGretainedunchanged;automaticdisplayderivativescoveredbysameCCBYSA4.0notice,creator/source/licenselinksandchangeindicationsretained. Visiblepageevidenceonly;nohiddenapplicationstatecollected. Nooverallhardwarecommercialclearanceorverifiedbuildclaim. Original image unchanged; displayed responsively. Technical/cost evidence dates unchanged.
    Revision, date & where cited

    phenoptix / MeArm · instructables.com · Creator-authored Instructables guide PublishedJune13,2023, titleexplicitMeArmV3.0, headerCCBYSA badgeanchorsby-sa/4.0, firstheroFVR35AILIOLU0GZ photograph; adjacentremixvideostill excluded.; image SHA-256 bb993bed948dc8eba56795a7b9d1ae43777d1bb63a6f1d3ebdf22ab36a6bc44f · Accessed Oct 26, 2026


    Used for: Overview

Videos

  • S005 MeArm Robotics (YouTube channel)
    The project’s own YouTube channel, found by searching YouTube and checked against the channel page. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube channel MeArm Robotics · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.5.0-draft.1

Change history

2026-10-04 — Added 1 YouTube reference(s) (S005): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.