Unitree Qmini
Robot / hardware buildPrintable small biped design using eleven Unitree 8010 motors and a Raspberry Pi 4B reference controller. [1] [4]
Build & first use →Official websiteSource codeUpstream build guideBill of materials
- For
- Biped robot builders with FDM printing and electronics skills. [1]
- Cost
- No current cost yet. Upstream bill of materials [1]
- Source rights
- Named licenses are documented by part. Includes noncommercial terms. Review licenses
- Unknowns
- operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details
Licenses & related hardware
- License
- CC BY-NC-SA 4.0 (noncommercial), MIT-style grant in linked laboratory repository · Details by part
Overview
Qmini is worth inspecting if you want a compact biped platform and can source Unitree actuators, a Go1 battery assembly and the specified electronics. Unitree has released a mechanical STEP assembly, a URDF and a Chinese DIY guide. This profile follows a pinned commit snapshot rather than a tagged release. Its mechanical design is under CC BY-NC-SA 4.0, so commercial manufacture or reuse is not cleared by this profile. [1] [2] [4] [5]
Is this for you?
- Use cases
- Biped design study
- Locomotion experimentation
What you need
- Host computer
Raspberry Pi 4B 8 GB reference controller; separate NVIDIA/Isaac Gym machine for linked training.
- Dependencies
- Unitree 8010 motors
- Go1 battery and adapter
- Raspberry Pi 4B
- USB-to-485 module
- RoboTamer4Qmini / Isaac Gym for the linked control route
- Tools
- FDM printer
- Heat-set insert installation tools
- Assembly and wiring tools
- Skills
- FDM printing
- Mechanical assembly
- Electronics wiring
- Robot control
Hardware & parts
Assembly & first use
Open the upstream getting-started guide [1]
- Source the eleven 8010 motors, Go1 battery assembly and specified electronics.
- Compare v2 STEP geometry with guide v1.2 and print/assemble the selected parts.
- Wire and zero the joints using the guide before evaluating the separate software stack.
- Assembly
DIY guide v1.2 gives printed-part settings, mechanical/electrical assembly and zero-position procedure.
- Calibration
Guide describes joint zero marking; no measured calibration or gait tuning here.
- Assembly time
Upstream claims 3–5 hours for assembly after printing and sourcing; not measured here.
Cost
No current, complete configuration-specific build cost has been established for this profile.
3D preview
Preview not available yet. Pinned v2.0 STEP assembly was retrieved and checked as a real geometric payload. No OSR viewer conversion, geometry fit or asset-specific reuse review has been completed, so this page links the original design without a hosted interactive preview.
Model sources
Pinned v2.0 STEP assembly was retrieved and checked as a real geometric payload. No OSR viewer conversion, geometry fit or asset-specific reuse review has been completed, so this page links the original design without a hosted interactive preview.
Project notes
What the source provides
The guide v1.2 gives FDM print settings, mechanical and electrical assembly steps, zero-position marking and a parts list. That list calls for eleven Unitree 8010 motors, a four-channel USB-to-485 module, Go1 battery and adapter assembly, Raspberry Pi 4B 8 GB, IMU, fans and hardware. The checked URDF describes ten revolute leg joints; the additional neck motor in the README is not mapped there. The v2.0 STEP archive was retrieved at the pinned revision: it contains a 339 MB AP214 STEP file with product definitions including motor, battery and Raspberry Pi references. This confirms a substantial geometric payload, not its printability or exact correspondence with every guide part. [1] [3] [4] [5]
A first build decision
Start by checking whether those bought-in parts can be obtained in your region. Then compare the guide's printed components and wiring to the v2.0 STEP and URDF before ordering or fabricating. The linked RoboTamer4Qmini repository documents Isaac Gym training and simulation on a separate Ubuntu 18.04/20.04 machine with an NVIDIA Pascal-or-later GPU and at least 8 GB of VRAM. Its README warns of hard-coded paths and says maintenance has stopped. A successful physical walking setup has not been reproduced here, and the release does not establish a complete current budget. [1] [4] [6]
The guide itself warns that printed leg/side structures may break or bend during debugging and that TPU feet may slip on smooth tile. Those are useful design cautions, not our test results. No fabrication, CAD fit check, wiring, calibration, controller deployment or gait test was performed. [4]
See the upstream robot images
Unitree's pinned repository includes a photograph of the assembled Qmini and a separate parts and modules montage. Both appear in the project's README. These are upstream images, not photographs of an OSR build. The repository has a CC BY-NC-SA 4.0 license, but the individual image creator and permission to host copies here have not been established, so this page links to the originals. [1] [2] [8] [9]
What we checked
Source research only. No commercial relationship or hands-on testing. No upstream media copied to the public site.
Not yet established
- Requirements: operating system
Updates
- Upstream last updated
- Not established
- Latest release
- Not established
- Profile updated
- Nov 7, 2026
- Sources last checked
- Nov 7, 2026
- Next review
- Dec 7, 2026
- Reviewed revision
- Commit snapshot f6f3fef723f8bb434f9d2679dfb6053b0aca93a8; no matching GitHub release found
Source files and licenses
Substantial inspectable biped geometry and assembly guide support a noncommercial design-reference entry; full build cost, controller deployment and gait remain unverified.
| Layer | Availability / license |
|---|---|
| mechanical design | available · CC BY-NC-SA 4.0 Artifact and declaration inspected at the cited scope. External assets/dependencies and actual operation need separate verification. [5] [2] |
| electronics | not found · License not fully assessed Block diagram and wiring are present; PCB design/schematics were not identified in the reviewed Qmini release. [1] [4] |
| firmware | not found · License not fully assessed No Qmini-specific firmware source identified in the reviewed hardware repository. [1] [4] |
| software | available · MIT-style grant in linked laboratory repository Artifact and declaration inspected at the cited scope. External assets/dependencies and actual operation need separate verification. [6] [7] |
| documentation | available · CC BY-NC-SA 4.0 Artifact and declaration inspected at the cited scope. External assets/dependencies and actual operation need separate verification. [4] [2] |
No separate artifact selected for this scoped entry.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
- S001 Qmini overview
Revision, date & where cited
unitreerobotics/Qmini contributors · github.com · revision
f6f3fef· README.md at · Accessed Nov 7, 2026
Used for: Overview, Is this for you?, What you need, Hardware & parts and 5 more - S002 CC BY-NC-SA 4.0 license
Revision, date & where cited
unitreerobotics/Qmini contributors · github.com · revision
f6f3fef· LICENSE at · Accessed Nov 7, 2026
Used for: Overview, Is this for you?, See the upstream robot images, Source files and licenses - S003 Qmini URDF
Revision, date & where cited
unitreerobotics/Qmini contributors · github.com · revision
f6f3fef· urdf/Qmini.urdf at · Accessed Nov 7, 2026
Used for: What the source provides - S004 Qmini DIY guide v1.2
Revision, date & where cited
unitreerobotics/Qmini contributors · github.com · revision
f6f3fef· Qmini_DIY.pdf at · Accessed Nov 7, 2026
Used for: Overview, Is this for you?, What you need, Hardware & parts and 4 more - S005 Retrieved v2.0 STEP assembly
Revision, date & where cited
unitreerobotics/Qmini contributors · github.com · revision
f6f3fef· STEP_file/Qmini_v2_0.STEP.zip at · Accessed Nov 7, 2026
Used for: Overview, What the source provides, Source files and licenses - S006 Linked RoboTamer4Qmini software
Revision, date & where cited
vsislab/RoboTamer4Qmini contributors · github.com · revision
1aed648· README.md at · Accessed Nov 7, 2026
Used for: Is this for you?, A first build decision, Source files and licenses - S007 Linked software license
Revision, date & where cited
vsislab/RoboTamer4Qmini contributors · github.com · revision
1aed648· LICENSE at · Accessed Nov 7, 2026
Used for: Source files and licenses - S008 Unitree assembled Qmini photograph
Revision, date & where cited
unitreerobotics/Qmini contributors · github.com · revision
f6f3fef· images/Qmini.jpeg at · Accessed Nov 7, 2026
Used for: See the upstream robot images - S009 Unitree Qmini modules montage
Revision, date & where cited
unitreerobotics/Qmini contributors · github.com · revision
f6f3fef· images/Qmini_modules.png at · Accessed Nov 7, 2026
Used for: See the upstream robot images
Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5