Open Source RoboticsRobots, software & field notes

Delta-Robot One magnetic tool

Magnetic pickupDelta robot tooling

Based on published sources · Not tested by us ·

Overview

Magnetic pick-and-place tool carried by the Delta-Robot One moving platform. [S001] [S002] [S003]

Official website · Source code

Specifications

DetailDescription
TypeDelta tooling
Source-researched; no physical verification.
Editorial assessment [S001] [S002] [S003] · Checked 2026-09-30
Intended usersBuilders evaluating this tooling design and its integration requirements
Editorial assessment [S001] [S002] [S003] · Checked 2026-09-30
AssemblyEffector.stl is a platform part, not a complete magnet. Resolve exact magnet BOM, driver, duty cycle and mount; no cobot adaptation established.
Known prerequisites and unresolved assembly decisions; not a complete build instruction.
Editorial assessment [S001] [S002] [S003] · Checked 2026-09-30
CalibrationNot known
Operating systemNot known
Computer neededNot known

3D preview

Preview not available yet. A model has not yet been prepared and approved for display on this page. This does not mean the project lacks CAD files; see Source files and licenses for the reviewed source availability.

Assembly and use

Mounting and application

The build repository demonstrates magnetic pick-and-place and labels the switched interface Gripper/GND (ON/OFF). It names Adafruit as a sourcing lead, without establishing an exact magnet part. Nearby motor or supply ratings must not be assigned to this output. [S001] [S002] [S003]

Before sourcing the build

Effector.stl is inventoried, but a complete magnetic-tool assembly is not established by the inspected material. Resolve exact magnet BOM, driver, duty cycle and mount; no cobot adaptation established. [S001] [S002] [S003]

Files and reuse terms

The hardware README states CC-BY-NC-SA-4.0: Attribution, NonCommercial and ShareAlike. Source availability and terms for the selected electronics, control dependencies and purchased components need separate confirmation. [S001] [S002] [S003]

CAD paths were inventoried without inspecting the geometry. Linked electronics and control resources were not established as a configuration-matched package; this does not show they are absent. Current delivered cost and measured performance are not established; no hardware was built or tested for this profile.

Cost

No current, complete configuration-specific build cost has been established for this profile.

Source files and licenses

Hardware README: CC-BY-NC-SA-4.0. Effector.stl is a platform part, not a complete magnet. Resolve exact magnet BOM, driver, duty cycle and mount; no cobot adaptation established.

LayerAvailability / license
mechanical designavailable · CC-BY-NC-SA-4.0
Hardware README: CC-BY-NC-SA-4.0. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [S001] [S002] [S003]
electronicsnot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [S001] [S002] [S003]
firmwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [S001] [S002] [S003]
softwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [S001] [S002] [S003]
documentationavailable · License not fully assessed
Hardware README: CC-BY-NC-SA-4.0. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [S001] [S002] [S003]

This profile scopes hardware tooling, without selecting a learned controller or training dataset.

References

Links identify the documentation and revisions used in this profile. Access dates record when each source was retrieved.

  1. S001 · deltarobotone
    Delta-Robot One magnetic tool pinned tree
    Accessed 2026-09-30 · 85895c145abc6162f9c9ba8e44b8e1159e096895
    Source notes

    Evidence for the scoped draft design assessment.

  2. S002 · deltarobotone
    Delta-Robot One magnetic tool / README.md
    Accessed 2026-09-30 · 85895c145abc6162f9c9ba8e44b8e1159e096895 README.md
    Source notes

    Evidence for the scoped draft design assessment.

  3. S003 · github.com
    delta-one-demo
    Accessed 2026-09-30 · Captured 2026-09-30
    Source notes

    Evidence for the scoped draft design assessment.

Research and review details

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Profile edited 2026-09-30 · Sources checked 2026-09-30 · Next review target 2026-10-30

Revision: 85895c145abc6162f9c9ba8e44b8e1159e096895.

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.