OpenCTD Marine Sensor Payload
Robot / hardware buildMIT-licensed coastal oceanographic CTD (conductivity, temperature, depth) sensor payload built around an Adafruit Adalogger Feather M0, MS5803-14 pressure sensor, MAX31865 RTD probe, Atlas Scientific EZO conductivity circuit, KiCad Rev8 PCBs, and 3MF printable chassis. [1] [3] [4] [6] [7]
Build & first use →Official websiteSource codeUpstream build guide
- For
- Marine researchers, educators, citizen oceanographers, and marine robotics teams needing an inspectable coastal CTD payload. [1]
- Cost
- No current cost or bill of materials established yet.
- Source rights
- Named licenses are documented by part. Review licenses
- Unknowns
- host computer, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details
Licenses & related hardware
- Ecosystem
- Arduino
- License
- MIT · Details by part
Overview
OpenCTD is an MIT-licensed coastal oceanographic instrument developed by Oceanography for Everyone and published in *Oceanography* (2024, DOI 10.5670/oceanog.2024.602). Designed for budget-restricted scientists, educators, and researchers working in nearshore coastal ecosystems, the current Rev8 revision logs conductivity, temperature, and depth to a microSD card from a 3.7 V LiPo battery inside a sealed PVC pipe housing. While the README notes that CTDs in general are commonly attached to moorings, AUVs, and ROVs, vehicle-specific mounting or telemetry integration for OpenCTD is not detailed in the README and requires separate assessment. [1] [7]
Is this for you?
- Use cases
- Nearshore coastal water-column profiling (salinity, temperature, depth)
- Hands-on marine science, oceanography, and STEM electronics courses
- Known limitations
- Hardware/3DPrints/ distributes nine .3mf printable meshes updated June 2026 rather than parametric STEP/CAD source files.
- Hardware/PCB/ includes .kicad_pcb, .kicad_pro, and Gerber ZIPs for Rev8 and Ofe_CPS, but no .kicad_sch schematic files are present in that directory.
- Custom Ofe_CPS pressure sensor breakout board requires advanced soldering techniques (SparkFun breakout is documented as an alternative).
- No standalone machine-readable BOM spreadsheet or verified current total build cost is published in the repository root; full parts lists reside inside the Rev8 PDF manual.
- Source review only: firmware compilation, sensor calibration, pressure waterproofing, and field deployment were not performed.
Scoped to inspected Rev8 repository tree.
What you need
Hardware & parts
- Hardware configuration
Cylindrical PVC-housed oceanographic CTD sensor payload with 3D-printed internal PowerSquid chassis
- Sensors
- MS5803-14 barometric/depth pressure sensor (4096 oversampling)
- PT1000 (or PT100) RTD temperature probe via Adafruit MAX31865
- Atlas Scientific EZO electrical conductivity (EC) sensor
- DS3231 real-time clock (I2C)
- Power
Standard 3.7 V lithium polymer (LiPo) battery
Assembly & first use
Open the upstream getting-started guide [1] · Project documentation [1]
Cost
No current, complete configuration-specific build cost has been established for this profile.
Cost, licensing, and review boundaries
The repository is licensed under the MIT License (LICENSE.md) and includes Documentation/OpenCTD_ConstructionOperation_REV8.pdf, but does not publish a standalone machine-readable BOM CSV or a verified current delivered build cost in the repository root. This review inspected only the pinned revision (b74b3ace812c); no firmware build, PCB fabrication, sensor calibration, pressure sealing, or water deployment was performed. [1] [4] [7]
3D preview
Preview not available yet. A 3D CAD assembly preview has not been packaged for this hardware entry yet.
Model sources
A 3D CAD assembly preview has not been packaged for this hardware entry yet.
Project notes
Rev8 sensor stack and firmware architecture
Inspecting Software/Firmware/OpenCTD_m0_Rev8/OpenCTD_m0_Rev8.ino alongside Software/README.md identifies the exact Rev8 electronics configuration built around an Adafruit Adalogger Feather M0 microcontroller: [1] [5] [6]
- Depth / pressure: MS5803-14 pressure sensor sampled at 4096 oversampling resolution. [6]
- Temperature: PT1000 (default
RREF = 4300.0,RNOMINAL = 1000.0) or PT100 RTD probe read over SPI through an Adafruit MAX31865 amplifier. [6] - Conductivity: Atlas Scientific EZO electrical conductivity circuit read over
SoftwareSerial(pins 12 and 13), with its 1-second default sampling period setting the overall logging cadence. [5] [6] - Timekeeping and storage: DS3231 real-time clock over I2C and microSD CSV logging, accompanied by dedicated calibration (
Serial_for_EC_Calibration_m0) and RTC reset sketches. Upstream notes that compilingRTClibmay also require installingAdafruit_BusIO. [5] [6]
Mechanical files, PCB artifacts, and build tradeoffs
Builders can assemble the Rev8 electronics either on a breadboard or using the custom KiCad control board in Hardware/PCB/. That directory provides OpenCTD_Rev8_PCB.kicad_pcb, OpenCTD_Rev8_PCB.kicad_pro, and Gerber archive OpenCTD_Rev8_PCB.zip, plus Ofe_CPS.kicad_pcb and OfE_CPS.zip for an in-house pressure sensor breakout board that upstream cautions requires advanced soldering compared with a SparkFun breakout. Notably, .kicad_sch schematic source files are not present in Hardware/PCB/, so schematic-level edits require reconstructing or cross-checking from the PCB layout and manual. [2] [4]
Mechanical files in Hardware/3DPrints/ (updated June 17, 2026 for Rev8 compatibility) consist of nine .3mf meshes: three sensor baseplate variants (Ofe_CPS, SparkFun breakout, and OpenROV IMU), a three-part PowerSquid internal chassis (top, bottom, cap), two router jigs for cutting notches in the PVC housing, and a cap wrench for the plumbers test cap. Upstream specifies 100% infill for baseplates (to prevent water-intrusion voids) and router jigs, and 50% infill for the PowerSquid chassis and wrench. No parametric STEP or native CAD source files are stored in Hardware/3DPrints/. [3]
What we checked
Source review only at commit b74b3ace812c. No firmware compilation, PCB fabrication, calibration, or water test was performed. No local image asset is bundled yet.
Not yet established
- Requirements: operating system, host computer
- A step-by-step setup summary
Updates
Source files and licenses
MIT-licensed, peer-reviewed oceanographic CTD payload with Rev8 Arduino firmware, KiCad PCB layouts/Gerbers, 3MF printable chassis/jigs, and PDF manuals; scoped partial because Hardware/PCB omits .kicad_sch schematics, Hardware/3DPrints provides .3mf meshes rather than parametric CAD, and no standalone BOM CSV or verified build cost is in-repo.
| Layer | Availability / license |
|---|---|
| mechanical design | available · MIT Nine Rev8 .3mf files (PowerSquid chassis, 3 sensor baseplates, 2 PVC router jigs, cap wrench); no parametric STEP/CAD sources in Hardware/3DPrints/. [3] [7] |
| electronics | available · MIT KiCad PCB layouts (.kicad_pcb, .kicad_pro) and Gerber ZIPs for Rev8 control board and Ofe_CPS pressure breakout; .kicad_sch schematic files are absent from Hardware/PCB/. [2] [4] [7] |
| firmware | available · MIT Rev8 Arduino M0 firmware plus EC calibration and RTC reset sketches. [5] [6] [7] |
| software | available · MIT Data import and analysis examples for CSV logs copied from the microSD card. [5] [7] |
| documentation | available · MIT Rev8 construction and operation PDF manual, calibration manual, and 2024 Oceanography paper (DOI 10.5670/oceanog.2024.602). [1] [7] |
Oceanographic sensor payload; no ML model weights.
Instrument hardware and firmware repository; no bundled oceanographic dataset.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
- S001 OceanographyforEveryone/OpenCTD README.md
Rev8 overview, coastal CTD scope, 3.7 V LiPo power, SD card logging, Adafruit Adalogger Feather M0 recommendation, and 2024 Oceanography publication DOI.Revision, date & where cited
Oceanography for Everyone · github.com · revision
b74b3ac· README.md at · Accessed Nov 21, 2026
Used for: Overview, Is this for you?, What you need, Hardware & parts and 5 more - S002 OceanographyforEveryone/OpenCTD Hardware/README.md
Hardware directory overview covering 3DPrints, KiCad/Gerber PCB files, and breadboard vs. custom PCB build options.Revision, date & where cited
Oceanography for Everyone · github.com · revision
b74b3ac· Hardware/README.md at · Accessed Nov 21, 2026
Used for: Hardware & parts, Assembly & first use, Mechanical files, PCB artifacts, and build tradeoffs, Source files and licenses - S003 OceanographyforEveryone/OpenCTD Hardware/3DPrints/README.md
Nine Rev8 3MF printable parts (three sensor baseplates, PowerSquid chassis top/bottom/cap, two PVC housing router jigs, cap wrench) with infill requirements.Revision, date & where cited
Oceanography for Everyone · github.com · revision
b74b3ac· Hardware/3DPrints/README.md at · Accessed Nov 21, 2026
Used for: Is this for you?, What you need, Hardware & parts, Assembly & first use and 2 more - S004 OceanographyforEveryone/OpenCTD Hardware/PCB/README.md
Rev8 KiCad control board and Ofe_CPS custom pressure sensor breakout board notes; directory tree confirms .kicad_pcb, .kicad_pro, and Gerber ZIPs without .kicad_sch files.Revision, date & where cited
Oceanography for Everyone · github.com · revision
b74b3ac· Hardware/PCB/README.md at · Accessed Nov 21, 2026
Used for: Is this for you?, What you need, Cost, Mechanical files, PCB artifacts, and build tradeoffs and 1 more - S005 OceanographyforEveryone/OpenCTD Software/README.md
Firmware, Atlas Scientific EZO conductivity calibration sketch, RTC reset sketch, four bundled Arduino library ZIPs, Adafruit_BusIO dependency note, and CSV analysis examples.Revision, date & where cited
Oceanography for Everyone · github.com · revision
b74b3ac· Software/README.md at · Accessed Nov 21, 2026
Used for: Is this for you?, What you need, Hardware & parts, Assembly & first use and 2 more - S006 OceanographyforEveryone/OpenCTD Software/Firmware/OpenCTD_m0_Rev8/OpenCTD_m0_Rev8.ino
Concrete sensor stack in Rev8 firmware: DS3231 RTC (I2C), MS5803-14 pressure sensor (oversampling 4096), PT1000/PT100 RTD via Adafruit MAX31865 (SPI), and SoftwareSerial EC probe at 1 s default logging interval.Revision, date & where cited
Oceanography for Everyone · github.com · revision
b74b3ac· Software/Firmware/OpenCTD_m0_Rev8/OpenCTD_m0_Rev8.ino at · Accessed Nov 21, 2026
Used for: What you need, Hardware & parts, Rev8 sensor stack and firmware architecture, Source files and licenses - S007 OceanographyforEveryone/OpenCTD LICENSE.md
Root MIT License (Copyright 2015 Oceanography for Everyone).Revision, date & where cited
Oceanography for Everyone · github.com · revision
b74b3ac· LICENSE.md at · Accessed Nov 21, 2026
Used for: Overview, Cost, Source files and licenses
Correction guidance · Discussion is not enabled · Profile format 0.8.0-draft.1
Change history
2026-11-21 — Initial source-reviewed Open Spec 0.8.0-draft.1 profile for Hardware Blind-Spot Batch 2.