Open Source RoboticsRobots, software & learning

OpenDrop Digital Microfluidics Platform

End effector

GPL-3.0 open-source electrowetting-on-dielectric (EWOD) digital microfluidics bio-lab platform (V4 generation) with a 16x8 electrode array, KiCad PCBs/schematics/Gerbers, .ods BOMs, STEP/STL enclosure parts, Arduino firmware, and Processing controller. [1] [2] [3] [4]

Build & first use →Official websiteSource codeUpstream build guideBill of materials

For
Digital-biology researchers, microfluidics labs, educators, and open-hardware builders fabricating or programming EWOD droplet platforms. [1]
Cost
No current cost yet. Upstream bill of materials [3]
Source rights
Named licenses are documented by part. Review licenses
Unknowns
host computer, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware
Ecosystem
Arduino

Requirements · Research details and dates

On this page

Overview

OpenDrop is an open-source electrowetting-on-dielectric (EWOD) digital microfluidics platform developed by Urs Gaudenz at GaudiLabs and released under the GNU General Public License v3.0 (license.txt). Rather than moving liquid with mechanical pipettes or syringe pumps, OpenDrop manipulates discrete droplets across a planar electrode grid for lab-on-a-chip biology, education, and experimental applications. [1] [2] [4]

Is this for you?

Use cases
  • Lab-on-a-chip droplet actuation and digital biology automation
  • Microfluidics research and education
  • Experimental art, music, and interactive droplet demonstrations

[1]

Known limitations
  • In-repository documentation is sparse: root README.md is brief and directs builders to external site http://www.gaudi.ch/OpenDrop without a consolidated V4 assembly manual inside GitHub.
  • Repository bundles multiple hardware generations (OpenDropV2, OpenDropV3, OpenDropV4) and historical KiCad rescue backups in one tree, requiring builders to isolate OpenDropV4/ and OpenDropController4_25/.
  • Electrowetting cartridges require high-voltage actuation (e.g., commented 240 V set_voltage call in OpenDropV42.ino) and careful dielectric/hydrophobic cartridge preparation not detailed in the root README.
  • BOMs are provided as OpenDocument spreadsheets (.ods) without a verified current total build cost in the repository.
  • Source review only: KiCad DRC/ERC, high-voltage board assembly, firmware compilation, and EWOD droplet actuation were not physically tested.

Scoped to inspected repository tree and V4 firmware.

[1] [2] [3] · Editorial assessment

What you need

Dependencies
  • KiCad for mainboard/cartridge PCB inspection and fabrication
  • Arduino IDE with OpenDrop, OpenDropAudio, Adafruit_GFX, and Adafruit_SSD1306 libraries
  • Processing IDE for OpenDropController4_25.pde host interface

[2] [3]

Tools
  • KiCad
  • PCB fabrication service (Gerbers provided in OpenDropV4/Electronics/)
  • 3D printer (for cartridge bars, joystick cap, and covers)

[3]

Hardware & parts

Upstream bill of materials [3]

Hardware configuration

Benchtop electrowetting-on-dielectric (EWOD) digital microfluidics platform with 16x8 electrode cartridge array

[1] [2]

Actuators
  • 16x8 electrowetting electrode ("fluxel") array with optional magnetic and heater cartridge modules

[2] [3]

Controller

Arduino-compatible OpenDrop V4 mainboard running OpenDropV42.ino, paired with Processing desktop controller (OpenDropController4_25.pde)

[2] [3]

Assembly & first use

Open the upstream getting-started guide [1]

Assembly

Mainboard PCB, electrode/heater/frame PCBs, and 3D-printed cartridge bars/covers under OpenDropV4/; external build documentation is linked at http://www.gaudi.ch/OpenDrop.

[1] [3]

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. A 3D CAD assembly preview has not been packaged for this hardware entry yet.

Project notes

Isolating the current V4 hardware and software stack

Because the repository preserves multiple historical generations (OpenDropV2, OpenDropV3, OpenDropV4) alongside KiCad rescue-backup folders, builders should start inside OpenDropV4/ and OpenDropController4_25/: [3]

  • Electronics: OpenDropV4/Electronics/OpenDropV4_MainBoard/PCB/ provides the editable KiCad PCB (OpenDropV4.kicad_pcb), schematic (OpenDropV4.sch and OpenDropV41_Schematic.pdf), and Gerber archive under PCB/Gerber/OpenDropV42.zip, with the mainboard BOM at OpenDropV4/Electronics/OpenDropV4_MainBoard/MaterialsOpenDropV4.ods. Companion subdirectories contain verified KiCad files for heater cartridges (DIMMCartridge_heaters), KiCad and DXF files for the frame (OpenFrame), and .ods BOMs for magnetic, basic, and universal module adapters. [3]
  • Mechanical hardware: OpenDropV4/Hardware/ includes OpenDropV4.STEP, printable STL cartridge bars (CartridgBar.STL, CartridgBarMagnetV2.STL, CartridgBarUniversal.STL), joystick cap, and covers. [3]
  • Firmware and host control: OpenDropV4/Software/OpenDropV42/OpenDropV42.ino drives a 16×8 electrode ("fluxel") matrix (FluxCom[16][8]) with an Adafruit_SSD1306 OLED display, joystick input, audio feedback, magnet toggles, and a 115200-baud serial link to the Processing desktop application (OpenDropController4_25/OpenDropController4_25.pde and electrodes.json layouts). [2] [3]

Documentation gaps, safety context, and review boundaries

In-repository assembly instructions are minimal: the 21-line root README points builders to http://www.gaudi.ch/OpenDrop, and those linked external build guides were not verified step by step, so their completeness for V4 remains unconfirmed. The .ods BOMs likewise do not include a verified current delivered build cost. Prospective builders must also account for high-voltage EWOD drive circuitry (reflected in the commented set_voltage(240, ...) call in OpenDropV42.ino) and cartridge surface preparation outside the GitHub README. This review inspected only the pinned revision (934a44db3ed4, last updated July 1, 2025); no PCB fabrication, firmware compilation, or droplet actuation test was performed. [1] [2] [3] [4]

What we checked

Source review only at commit 934a44db3ed4. No PCB fabrication, firmware compilation, high-voltage bring-up, or droplet test was performed. No local image asset is bundled yet.

Not yet established

  • Requirements: operating system, host computer
  • A step-by-step setup summary

Updates

Upstream last updated
Jul 1, 2025 [1]
Latest release
Not established
Profile updated
Nov 21, 2026
Sources last checked
Nov 21, 2026
Next review
Feb 19, 2027
Reviewed revision
934a44d · combined hardware and software repository

Source files and licenses

GPL-3.0 EWOD digital microfluidics platform with complete V4 KiCad mainboard/cartridge schematics, PCBs, Gerbers, .ods BOMs, STEP/STL hardware, Arduino firmware, and Processing controller; scoped partial because in-repo assembly documentation is minimal (hosted externally) and multiple legacy generations are mixed in one tree.

LayerAvailability / license
mechanical designavailable · GPL-3.0-only
OpenDropV4.STEP, STL cartridge bars/covers/joystick cap, DXF frame outlines, and laser/foil files under GPL-3.0. [3] [4]
electronicsavailable · GPL-3.0-only
KiCad PCB layouts, schematics (.sch/.kicad_sch, schematic PDF), Gerbers (OpenDropV42.zip), and .ods BOMs for V4 mainboard and heater/magnet/universal modules under GPL-3.0. [3] [4]
firmwareavailable · GPL-3.0-only
Arduino firmware for OpenDrop V4.2 mainboard and universal adapter under GPL-3.0. [2] [4]
softwareavailable · GPL-3.0-only
Processing desktop controller (OpenDropController4_25.pde) and electrode layout JSON configs under GPL-3.0. [3] [4]
documentationavailable · GPL-3.0-only
Root README points to external project website http://www.gaudi.ch/OpenDrop; in-repo assembly documentation is minimal. [1] [4]

Digital microfluidics instrument; no ML model weights.

Digital microfluidics hardware/software repository; no ML datasets.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.8.0-draft.1

Change history

2026-11-21 — Initial source-reviewed Open Spec 0.8.0-draft.1 profile for Hardware Blind-Spot Batch 2.