Open Source RoboticsRobots, software & learning

TAKTO ONE Tendon-Driven Hand Exoskeleton

End effector

Open-source wearable hand exoskeleton with 12 AS5600 magnetic joint encoders, tendon actuation via forearm Dynamixel XC330 servos, custom KiCad PCBs, and Teensy 4.1 onboard control. [1] [2]

Build & first use →Official websiteSource codeUpstream build guideBill of materials

For
Rehabilitation, teleoperation, haptics, and hand-tracking researchers building wearable open-hardware hand exoskeletons. [1]
Cost
EUR 164.48–1,222.25 upstream parts estimates for 2 versions [1] [2] · checked Nov 21, 2026 · DetailsNot included: separate JLCPCB PCB/PCBA order (USD 170.73 delivered), unpriced BOM lines (MyoWare 2.0 EMG, microSD, motor supply, potentiometer, button, buzzer) and thumb mechanism (not yet designed) and more.
Source rights
Named licenses are documented by part. Review licenses
Unknowns
host computer, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware

Requirements · Research details and dates

On this page

Overview

TAKTO ONE is an open-source wearable hand exoskeleton developed by Sebastian Molano for a master's thesis at Hochschule Anhalt. Rather than relying on external cameras or flex-sensor gloves, it places 12 AS5600 magnetic encoders directly at the joints of the four long fingers (MCP abduction, MCP flexion, and PIP flexion per digit) and pairs them with two BNO085 IMUs, an optional MyoWare 2.0 EMG input, and forearm-mounted Dynamixel XC330-M181-T tendon drives controlled onboard by a Teensy 4.1. [1] [2]

Is this for you?

Use cases
  • Hand-motion dataset recording
  • Teleoperation of robot hands without optical occlusion
  • Sign language recognition experiments
  • Rehabilitation and intent-detection research

[1]

Known limitations
  • Experimental research prototype; not a medical device and not certified for clinical or unsupervised rehabilitation use.
  • No thumb mechanism is built yet (two spare spool bays and two spare encoder channels are reserved).
  • Force rendering, transparency, latency, and assistance behavior have not been measured yet; released firmware defaults to N_MOTOR = 2.
  • Known PCB erratum on palm carrier: second TCA9548A multiplexer SDA/SCL labels are swapped on channels 8 to 13, requiring crossed wiring.
  • 74HC241 half-duplex Dynamixel interface is wired externally rather than integrated on the published palm-carrier Gerbers.
  • Upstream asserts a commercial text-and-data-mining (TDM) reservation under EU Directive 2019/790 Art. 4(3) and unregistered trademark rights on the TAKTO name.

[1] [2] [3]

What you need

Dependencies
  • Teensy 4.1
  • Dynamixel XC330-M181-T servos (for TAKTO ONE actuation)
  • SN74HC241N half-duplex buffer
  • Optional MyoWare 2.0 EMG sensor

[1] [2]

Tools
  • FDM 3D printer (PETG/PLA)
  • PCB fabrication/assembly service (e.g., JLCPCB)
  • Soldering and wiring tools

[1] [2]

Hardware & parts

Upstream bill of materials [1] [2]

Hardware configuration

Wearable tendon-driven hand exoskeleton (4 long fingers; thumb unbuilt)

[1]

Actuators
  • Dynamixel XC330-M181-T servos (designed for 8 servos across 4 long fingers in 10 forearm spool bays; 2 fitted on author prototype)

[1] [2]

Controller

Teensy 4.1 (600 MHz MCU running up to 2 kHz control loop and 50 Hz sensor frame logging)

[1] [2]

Sensors
  • 12x AS5600 magnetic joint encoders
  • 2x BNO085 IMUs (hand and forearm; 3rd thumb channel unpopulated)
  • Optional MyoWare 2.0 surface EMG sensor

[1] [2]

Degrees of freedom

12

12 instrumented finger joints (MCP abduction, MCP flexion, and PIP flexion on each of the 4 long fingers).

[1]

Assembly & first use

Open the upstream getting-started guide [1] · Project documentation [1]

  • Optionally test the browser 3D twin and operator console on simulated data via python3 -m http.server 8096 --directory software/console/app.
  • Source components from docs/BOM.md (choose sensing-only TAKTO Lite or actuated TAKTO ONE).
  • Print the 71 structural parts from cad/ in PETG/PLA.
  • Fabricate and assemble the palm carrier and 12 AS5600 encoder PCBs from electronics/, observing the channels 8-13 SDA/SCL swap erratum and external 74HC241 wiring.
  • Assemble following docs/build-guide.pdf and flash firmware/ onto the Teensy 4.1.

[1] [2]

Assembly

71 3D-printed parts (PETG/PLA), 12 custom AS5600 encoder PCBs, 1 curved palm-carrier multiplexer PCB, external 74HC241 servo interface, and elastic tendon/ratchet spool transmission documented in docs/build-guide.pdf.

[1] [2]

Cost

VersionPrice
Upstream indicative priced parts for actuated 4-finger TAKTO ONE (excluding separate USD 170.73 PCB order and unpriced minor items).EUR 1222.25 [1] [2]
Parts estimate

EU (Germany supplier references) · Checked 2026-11-21

Included8x Dynamixel XC330-M181-T servos; 12x diametric magnets; 2x BNO085 IMUs; Teensy 4.1; GC9A01A round display; SN74HC241N buffer; Print filament and transmission hardware
Not includedSeparate JLCPCB PCB/PCBA order (USD 170.73 delivered); Unpriced BOM lines (MyoWare 2.0 EMG, microSD, motor supply, potentiometer, button, buzzer); Thumb mechanism (not yet designed); VAT, shipping, and assembly labor
StockDIY component sourcing plus PCB fabrication.
Delivery and taxExcludes VAT and shipping unless noted on individual BOM lines.
Price details

Upstream indicative 2026 priced parts total for 4-finger actuated TAKTO ONE (EUR 1,040 for 8x Dynamixel XC330-M181-T + EUR 182.25 other priced parts). Separately requires USD 170.73 JLCPCB PCB/PCBA order for palm carrier and 12 encoder boards; some minor items (microSD, MyoWare, motor supply, pot/button/buzzer) are unpriced in the BOM.

EU (Germany supplier references) · Checked 2026-11-21 · Quantity 1

JLCPCB PCB order (USD 170.73), motor power supply, microSD card, 3D printer, and soldering tools.

VersionPrice
Upstream indicative priced parts for sensing-only TAKTO Lite (excluding separate USD 170.73 PCB order).EUR 164.48 [1] [2]
Parts estimate

EU (Germany supplier references) · Checked 2026-11-21

Included12x diametric magnets; 2x BNO085 IMUs; Teensy 4.1; GC9A01A display; Print stock
Not includedSeparate JLCPCB PCB/PCBA order (USD 170.73 delivered); Actuation servos, tendons, 74HC241, and motor power supply; Unpriced minor BOM items (MyoWare 2.0, microSD, etc.); VAT and shipping
StockDIY component sourcing plus PCB fabrication.
Delivery and taxExcludes VAT and shipping unless noted on individual BOM lines.
Price details

Upstream indicative 2026 priced parts total for sensing-only TAKTO Lite (omits 8 servos, tendons, 74HC241, and motor supply). Separately requires USD 170.73 JLCPCB PCB/PCBA order.

EU (Germany supplier references) · Checked 2026-11-21 · Quantity 1

JLCPCB PCB order (USD 170.73), microSD card, 3D printer, and soldering tools.

Cost, licensing, and review gaps

Upstream's 2026 BOM prices components at EUR 1,222.25 for the 4-finger actuated TAKTO ONE (EUR 1,040 of which is eight XC330-M181-T servos) or EUR 164.48 for TAKTO Lite, plus USD 170.73 for both custom PCBs fabricated and assembled by JLCPCB; several minor items (MyoWare 2.0, microSD card, motor supply, potentiometer, button, buzzer) are unpriced, and VAT/shipping are excluded. Licensing is cleanly separated in LICENSE.md: CERN-OHL-S-2.0 for CAD and PCBs (with one unmodified third-party ORCA spool file under CC-BY-4.0), Apache-2.0 for firmware and software, and CC-BY-4.0 for documentation and media, alongside a trademark notice on the TAKTO name and an EU commercial text-and-data-mining reservation. This review inspected only the pinned revision (39d178c45ff7); no fabrication, PCB verification, or worn test was performed. [1] [2] [3]

3D preview

Preview not available yet. The upstream design is linked below. An interactive preview has not been prepared for this profile.

Project notes

Hardware, electronics, and build variants

The repository provides STEP and STL files for 71 printed parts (built in PETG/PLA), full KiCad projects and JLCPCB manufacturing outputs for two custom boards—a curved palm carrier with dual TCA9548A I²C multiplexers and 12 compact AS5600 encoder boards—alongside Teensy firmware, a serial-to-WebSocket bridge, a browser 3D twin, an Expo mobile app, and a prototype WebXR AR viewer. Builders can assemble either the sensing-only TAKTO Lite or the actuated TAKTO ONE using the same firmware. [1] [2]

Upstream discloses several concrete engineering boundaries before building: the palm carrier has a documented erratum where SDA and SCL labels are swapped on channels 8–13 of the second multiplexer, the SN74HC241N half-duplex Dynamixel buffer is wired off-board rather than included on the published palm-carrier Gerbers, no thumb linkage exists yet, and the author's self-funded prototype fitted two servos (with N_MOTOR = 2 in the released firmware) rather than all eight. Force rendering, transparency, latency, and assistance performance remain unmeasured, and the device is explicitly not a certified medical product. [1] [2]

What we checked

Source review only. Experimental non-medical prototype; no physical build, PCB bring-up, or worn safety test was performed. No local image asset is bundled yet.

Not yet established

  • Requirements: operating system, host computer

Updates

Upstream last updated
Oct 21, 2026 [1]
Latest release
Sep 11, 2026 [1]
Profile updated
Nov 21, 2026
Sources last checked
Nov 21, 2026
Next review
Dec 21, 2026
Reviewed revision
39d178c · combined hardware and software repository

Source files and licenses

Complete open-hardware wearable hand exoskeleton with cleanly separated CERN-OHL-S-2.0 hardware (STEP + KiCad), Apache-2.0 firmware/software, and CC-BY-4.0 documentation; non-medical prototype status, unbuilt thumb, and ORCA/TDM/trademark notices are disclosed.

LayerAvailability / license
mechanical designavailable · CERN-OHL-S-2.0
STEP and STL files in cad/ under CERN-OHL-S-2.0; one third-party ORCA spool file in cad/third_party/ remains CC-BY-4.0. [1] [3]
electronicsavailable · CERN-OHL-S-2.0
KiCad schematics, layouts, Gerbers, and JLCPCB BOM/CPL files for palm_carrier and encoder_board. [1] [3]
firmwareavailable · Apache-2.0
Teensy 4.1 control, sensor logging, and round-display watch-face firmware. [1] [3]
softwareavailable · Apache-2.0
Serial-to-WebSocket bridge, browser 3D twin/operator console, Expo companion app, and WebXR AR viewer (LUMEN). [1] [3]
documentationavailable · CC-BY-4.0
Illustrated build guide PDF, wiring PDF, BOM, and media under CC-BY-4.0 (author notes EU commercial TDM reservation in LICENSE.md). [1] [3]

Core TAKTO ONE repository does not ship ML model weights; TAKTO-SIGN recognizer is external.

Repository includes only synthetic sample recordings for viewer testing, not a benchmark dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5

Change history

2026-11-21 — Initial source-reviewed draft for Hardware Blind-Spot Batch 1.