Robotics index

Underactuated bar-swinging research robot with one QDD actuator, passive hooks and simulation/control sources; requires a ladder test rig, and the reviewed hardware script conflicts with its guide.

XL430-W250-T drives a belt/rail gripper with constant-force springs; U2D2 and power hub are listed.

Five-actuator robotic development hand with a flexible printed palm, rigid covers and separate Almond controller and Artichoke firmware sources.

A five-finger tendon-driven hand with seven actuators, sixteen joints and separate hardware/software licenses.

Six-DoF anthropomorphic hand with linkage fingers, adaptive thumb and worm-and-rack transmissions.

A modular syringe pump and extrusion design with printable parts and multiple syringe and mounting configurations.

A four-arm bimanual teleoperation and demonstration-recording system with a separate learning stack.

A printable four-finger hand with eight actuators and a Reachy 2 wrist interface.

A six-axis workshop arm with printed or aluminum structure; this review covers MK3 and its matching 6.3-series controls.

A 1.2 m humanoid design with separate media and motion computers, fabricated metal/nylon structure and an unfinished locomotion-policy release.

A printed educational robot arm with CAD, firmware, BOM and assembly documents in one source repository.

A humanoid built around printed gearboxes, with separate simulation assets and low-level control code that requires joint calibration after power cycles.

Large-format pellet screw extrusion around a purchased RobotDigg 16 mm compression screw/barrel and NEMA23 flange.

A six-actuator research biped with passive ankles, tethered power/data and no active yaw control.

Humanoid design and one-leg benchmark exploring low leg inertia through belts and parallel linkages; the maintainer has put the project on hold.

Printable CRAFT Hand parts and Bambu print profiles with left/right palm and thumb alternatives.

A family of fourth-axis jaw grippers, flexible jaws, single/double suction heads, pen tools and a filament-printing head.

Magnetic pick-and-place tool carried by the Delta-Robot One moving platform.

A tendon-driven hand with wrist and forearm; v1 build modifications differ from the v2 early-access design.

Twelve-servo Raspberry Pi/Arduino quadruped with downloadable CAD and Python gait code; hardware is noncommercial source-available and manual calibration is required.

Python RC-car platform for manual driving and optional learned control; reviewed Raspberry Pi/PCA9685 build guidance has OS-version conflicts and an incomplete parts budget.

C++ and Python toolbox for multibody dynamics, mathematical optimization and model-based robot control, with installation choices tied to platform and solver requirements.

Ten-degree-of-freedom research biped with machined aluminum parts, EtherCAT motor control and learned locomotion; artifact and dependency licenses need separate checks.

A compact custom arm combining CNC parts, harmonic reducers and custom motor-control electronics.

Tool-coupling hardware with dimensioned aluminum parts, a stepper-driven latch and V6/Hemera tool variants.

Six-wheel printed rover with separately preserved build files and ROS software; the reviewed default software uses ROS Melodic and requires per-robot calibration.

Ackermann-steered racing research platform; the preserved Xavier NX/Slash guide differs from its newer Orin Nano Super/Fiesta parts list and requires configuration-specific calibration.

Pellet extruder with multiple STEP revisions and NEMA17/NEMA23 variants, intended for MIM printing materials.

A six-axis printed arm built around cycloidal gearboxes, with separate mechanical and control documentation.

A suction cup combining vision and tactile sensing with wireless electronics.

Planetary-geared filament feeder for a Stealthburner toolhead, with custom gearbox parts, selectable printed housings and a detailed assembly manual.

Robot simulation library and application with physics, sensors and plugins; Jetty setup and ROS integration require matching package and distribution choices.

A printable replacement gripper for SO-101 that reuses the original gripper motor.

A humanoid development project with a separate arm-and-exoskeleton branch of work for LeRobot teleoperation.

Two-wheel balancing robot project using a Raspberry Pi, pi3hat and moteus motor controllers, with printed parts and source-defined balance settings.

Six linear actuators drive five fingers with coupled joints; NUCLEO-F303K8 control, Bluetooth and ROS support.

Bridge that exposes position-controlled ros2_control arms as Intrinsic ICON hardware modules.

C++ shared-memory transport and real-time utilities used by the ICON control framework.

A research humanoid family whose hardware revisions, robot configuration and software distribution must be matched before reproduction.

A humanoid soccer research platform with a released load-bearing plastic body design and a separately maintained ROS framework.

A modular printable humanoid with body-section tutorials, tendon-driven hands and a separate MyRobotLab control route.

Local robotics runtime, SDK and real-time control framework with a documented machine-tending simulation route.

Preview framework for managing model-serving lifecycles and exposing inference services to ROS 2.

MoveIt planning services and client skills for Intrinsic Core, with a documented offline mock-hardware route.

Configurable CNC machine-tending reference application using Intrinsic Core, behavior trees, perception and machine I/O.

ROS camera adapters with documented Orbbec, Luxonis, Zivid and experimental Ensenso integration routes.

GPU-accelerated robot-learning framework; the reviewed 3.0 early-access release introduces multiple physics backends and changed installation and migration workflows.

Small Jetson Nano educational robot with printed chassis and browser-based control; the reviewed 0.4.3 build uses legacy Nano-specific images and matched wheel/caster parts.

Six-wheel rocker-bogie rover with off-the-shelf mechanical parts and separate ROS control software; reviewed hardware and software snapshots need version and calibration reconciliation.

Kinematic tool-changing ecosystem including extrusion and pen tools; liquid-handling use is reported.

Raspberry Pi mecanum robot with ROS 2 navigation using lidar and an IMU; its published wheel commands are not measured wheel speeds.

A public-alpha humanoid project whose CAD, operating system, simulation and inference code live in separate sources.

Printable humanoid with FreeCAD sources, a Servo 2040 control route and MuJoCo examples; power selection and several servo mappings remain unresolved.

A printable Dynamixel arm with a separate leader design for teleoperation and robot-learning experiments.

An anthropomorphic hand with Full and Lite motor options and separate CAD downloads.

Three-wheel mobile manipulator with SO-100/SO-101 arm options, printed parts and a separate LeRobot teleoperation stack.

Tools for collecting robot demonstrations and training and deploying learned policies.

Compact syringe plunger driven by an NPM PFCL25-48Q4 linear stepper; printed parts optimized for ABS.

Configurable ROS 2 mobile-robot stack; this profile selects a two-wheel differential-drive, ESP32 control route with separately versioned firmware and measured chassis parameters.

A vacuum pick-and-place nozzle subsystem with inventoried FreeCAD holder and spring files and separate purchased-component references.

Wheeled balancing robot with articulated servo legs, Arduino balance firmware and Raspberry Pi inverse-kinematics examples; electronics and controller integration remain incomplete.

Experimental printer tool changer that rotates permanent-magnet rings to attach lightweight tools; requires custom docks and Klipper configuration.

Mobile robot base with available ROS host software; the reviewed setup follows separately preserved Noetic sources, with unreleased controller firmware and revision-specific hardware constraints.

Two AX-12A servos drive parallel fingers through four-bar linkages; OpenRB-150 control and a palm RealSense D405.

C++ allocation monitor for detecting heap operations inside designated real-time sections.

A four-degree-of-freedom educational arm made from versioned laser-cut parts.

Ten-joint biped with purchased actuators, machined and welded metal parts, and a ROS 1 learning-to-control workflow; external hardware rights and build completeness need separate checks.

Twelve-joint quadruped with purchased actuators and fabricated metal parts; its preserved ROS 1 control snapshot warns that the supplied policy is not very stable.

A roughly 30 cm printed humanoid using 19 DYNAMIXEL servos, a Raspberry Pi Zero 2 W and a custom-fabricated robot HAT.

Original Mini Pupper quadruped with twelve custom servos, Raspberry Pi hardware and separate movement/ROS stacks; hardware generation, image and calibration route must be matched.

A six-legged educational robot with printable chassis and legs, Dynamixel motors and Arduino control.

Quadruped source collection with distinct A1 and A2 configurations, printable structural parts, C++ control and browser-based simulation; this review centers on the documented A1 operating configuration.

Bimanual mobile manipulation platform integrating purchased arms and an AgileX Tracer base; the selected source covers teleoperation and episode recording.

A ROS 2 manipulation framework supporting motion planning and kinematics.

A modular stepper-driven gripper with selectable rail and motor lengths.

Physics engine for articulated mechanisms and contact, with C/Python interfaces and a version-sensitive model and simulation workflow.

RC-based research racecar; the reviewed Nano route uses V3 printed parts and separately versioned ROS control packages, with older firmware/image assumptions requiring validation.

Small tracked Jetson robot; this profile covers the preserved 1.5.1 source, whose container recipe targets ROS 2 Foxy and whose STL files carry noncommercial terms.

ROS 2 navigation framework with configurable bringup, localization and behavior-tree navigation; robot and distribution matching are essential.

A humanoid interaction research platform with distinct FDM and SLS-oriented mechanical designs and a separate software repository.

Two humanoid soccer research designs with separate CAD, actuator selections and fabrication requirements.

Printable Niryo One arm designs with a separate ROS stack and a documented older-hardware archive.

Transformer diffusion robot policies with pretrained checkpoints and fine-tuning tools; observation history, action statistics and robot-specific interfaces must match the selected model.

A small printed biped with bus servos, a Raspberry Pi runtime and learned walking policies; the reviewed v2 build still has documentation and configuration gaps.

Compact rack-driven gripper with an assembly STEP and upstream build photo; exact actuator, BOM and control integration still need to be specified.

An arm research platform whose hardware release separates the arm, evaluation cell and KER assemblies.

Smartphone-controlled wheeled robot platform; the reviewed DIY configuration combines an Arduino Nano and L298N driver, with phone and firmware requirements distinct from the advertised body cost.

Nybble/Bittle robot-family entry centered on OpenCat 1.2.5 NyBoard firmware, calibration and host tools; software openness does not establish complete frame or electronics manufacturing sources.

A four-joint DYNAMIXEL arm with a separate gripper axis, documented for PC-based ROS control or standalone OpenCR operation.

Parallel-jaw gripper for the LITE 6 using a Dynamixel XL330 servo, printed housings, machined claws and OpenRB control examples with a serial-rate mismatch to resolve.

Vision-language-action model code, checkpoints and adaptation examples for pi0, pi0-FAST and pi0.5, with backend-specific features and robot-specific action conventions.

Research vehicle conversion built around a specific mobility scooter, with Arduino throttle control, actuator steering and a legacy ROS/Gazebo stack.

Twelve-servo printed quadruped prototype with CAD, PCB files and ROS control sources; calibration, gait refinement and build instructions remain incomplete.

Four-wheel mobile base built from aluminum extrusions, with a documented articulated chassis, radio control and encoder-based motor control.

Tendon-driven hand family with base, touch, lite and joint-sensing variants; Feetech and Dynamixel motor-specific parts.

Modified Replistruder 5 with NEMA17, 3:1 GT2 belt reduction, anti-backlash TR8×1.5 lead screw and 1 mL Hamilton syringe.

A printed desktop arm with a separate Commander application and a required PAROL6 control board.

A printable humanoid whose #5 basic design replaces the #4 part set and uses Raspberry Pi 5 compute.

Printed parallel fingers with interchangeable tips and a Feetech STS3215; optional camera mount.

A six-axis research arm using Dynamixel MX-28 motors and Python control.

A six-axis educational arm using printable parts, Dynamixel XL-320 servos and Raspberry Pi control.

A printed research humanoid using 25 Dynamixel actuators and a documented legacy Odroid setup.

A pellet-printing design for an Ender-3 conversion, with inventoried screw, barrel and heat-block geometry.

A Reachy 2 ROS 2 workspace providing robot descriptions, control interfaces and simulation launch components.

An expressive desktop robot with separate Wireless, USB-connected Lite and simulation setup routes.

Parallel gripper using the WHJ03 joint module, interface PCB and 24 V RS485/Modbus RTU control.

Syringe extrusion design for FRESH hydrogel printing, distributed as STL and STP in a versioned Zenodo archive.

Underactuated two-finger gripper with DM4310 actuation, assembly CAD and a mixed fabrication BOM; control licensing is unresolved.

Robot-learning-from-demonstration framework with HDF5 dataset tooling, offline learning algorithms and version-specific simulation datasets.

A parallel gripper for SO-ARM100/101 with selectable guide rods and modular printed parts.

MuJoCo-based robot-learning environments with configurable robots, grippers, controllers and observations; the reviewed v1.5.2 setup requires matching rendering and action conventions.

A 20-joint research humanoid with a 2025 ROS 2 revision and an older ROS 1 software lineage that must be kept distinct.

Libraries and tools for robot applications, reviewed through a Humble release manifest and version-matched documentation for installation and node communication.

ROS 2 framework for managing controllers and hardware interfaces, with mock components for checking integration before physical hardware trials.

ROSbot 2R mobile platform with separately versioned ROS packages and CORE2 microcontroller firmware; this entry distinguishes the 2R configuration from newer ROSbot hardware.

A learned-control humanoid hand with external fabrication instructions, CAD and controller data.

Tendon-driven sliding jaws on a 12 mm rail, MX28T servo, OpenCM9 and EXP485. Optional capacitor board supports power-loss repositioning.

A printable robot arm for teleoperation and robot-learning experiments.

A pneumatic soft gripper made with cast elastomer and printed molds.

A modular torque-controlled quadruped family; this review distinguishes wired Solo12 from its battery-and-wireless upgrade.

A motor-driven adaptive gripper with a reported 48 mm stroke and CAN control.

A historical eight-actuator quadruped using coaxial leg mechanisms, Teensy control and customized ODrive firmware.

The original servo-driven Stanford Pupper, a Raspberry Pi quadruped whose upstream support has ended in favor of a separate v3 design.

A printable six-degree-of-freedom teaching arm with editable FreeCAD, STEP and STL mechanical sources.

Printed desktop biped with four custom torque actuators, two positioning servos and a shared Python simulation/hardware interface; controller-source licensing remains unresolved.

A humanoid research platform with distinct 2XC and 2XM motor configurations, separate PCB sourcing and noncommercial hardware terms.

A mobile robot platform for learning and experimenting with navigation.

ROS 2 mobile research platform on an iRobot Create 3 base, with distinct Standard/Lite sensor packages and distribution-specific base-firmware requirements.

Wheeled biped with four leg servos, two driven wheels and a Raspberry Pi control stack; the reviewed build guide needs revision matching.

Filament toolhead platform with CAD and printable housings for a printer extrusion assembly.

Robot simulation environment with a scene editor, sample worlds and controller APIs; reviewed at R2025a with release-specific graphics requirements and asset licensing.

Reaction-wheel unicycle research platform, scoped to v2.5 CAD and firmware with a documented state-estimation error and historical development tools.

A family of adaptive hands with shared CAD parts and a separate Dynamixel control repository.

A family of six-axis YAM arms supported by a Python and CAN control library with revision-specific models.

Yeah Hand/Rebelia lineage: humanlike hand with separate robot/prosthetic firmware and commercial servos.

DYNAMIXEL-driven two-finger gripper with a camera, assembly CAD and robot-specific mounting parts.